Twitter Updates for 20-10-2010

Twitter Updates for 20-10-2010

  • Fedora seems to be the high-flyer atm. Burning live CD.. 00:04:59, 2010-10-20
  • Fedora 13, Suse 11.3, Ubuntu Netbook 10.10 Live CDs. None fully load, at least in <1hr. DLing Fedora 10 Live. RAM is the issue. 01:59:02, 2010-10-20
  • I am in dire need of help with going to bed on time. 04:49:51, 2010-10-20
  • I am also still feeling terribly depressed, but "socialising" so much feels alien, so now I'm hiding from people. Even when "social" is IMs. 04:52:12, 2010-10-20

Twitter Updates for 19-10-2010

Twitter Updates for 19-10-2010

Twitter Updates for 18-10-2010

Twitter Updates for 18-10-2010

  • Am logged onto Twitter from Ubuntu in the workshop. Ooooooh~ 01:19:43, 2010-10-18
  • Ubuntu recognizes the bodged-together card reader, Windows gives an error. 01:20:24, 2010-10-18
  • Card reader is a USB pass-through reader meant to plug onto the side of an Epson printer. Trimmed down case, looks tidy. 01:21:39, 2010-10-18
  • Suits me fine. Just need the CF socket under Linux for a little project. 01:23:09, 2010-10-18
  • Tried testing the stall-current of the robots motors. Exceeds 10Amps. High as the meter goes. 01:24:15, 2010-10-18
  • I also sheared 3 different pins trying to jam the wheel. Hardened steel ok eventually, but it still bent it 90degrees. 01:25:59, 2010-10-18
  • Stall-current should be 15Amp or over for a 12v 180Watt motor. Will need to find a shunt to up the meter range. And calculations. 01:28:18, 2010-10-18
  • Will also have to find perfect fit hardened steel pins for the drive shafts. 01:29:19, 2010-10-18
  • Still, needed castings came out ok today. Some more to do tomorrow still. Livestream also went well. 01:32:33, 2010-10-18
  • Webcam not auto-working under Ubuntu. Not too bothered yet. Hope to change cam soon anyway. 01:43:16, 2010-10-18
  • Going in to shower and probably sleep. 01:43:56, 2010-10-18
  • I have been extremely outbid on the freezer. Very unexpected. :( 16:14:16, 2010-10-18
  • @sorvall_sergal Take them all in one go, build a car. And a garage for it. And the house to go with the garage. in reply to sorvall_sergal 17:53:31, 2010-10-18
  • XP can split mic input, but not webcams. Looks like it's SplitCam or Manycam for that job. SplitCam *sounds* less resource-hungry. 22:41:52, 2010-10-18
  • Don't know if progs under Linux can share webcam sources or not, since cam not working on Ubuntu at all yet. 22:42:40, 2010-10-18
  • Today has been epic failure. Nothing done at all, woke very late. Also another ulcer and top lip cracked and stinging. 22:43:26, 2010-10-18
  • Okay, split webcam to Livestream & motion-tracking script, run servo control to Arduino board. Should all be just setting the right I/Os. 23:08:21, 2010-10-18

Twitter Updates for 17-10-2010

Twitter Updates for 17-10-2010

Twitter Updates for 16-10-2010

Twitter Updates for 16-10-2010