@artsyhonker @OneOffDave Not specifically, but a nut is a nut if you know the size. Would need measuring.
@Poodle_Tastic Ants?
@Poodle_Tastic Ants?
But to balance without the frame at all, the motor…
But to balance without the frame at all, the motor is already going to need positioning right at the limit of the frame.
The frame is going to be a couple of cm wider on o…
The frame is going to be a couple of cm wider on one side due to the pulleys. Had hoped the motor would counterbalance that.
Checked the centre of balance for the rotocaster o…
Checked the centre of balance for the rotocaster outer frame. Looks like I’ll have to use some counterweights. https://t.co/ctixOS3vFC
