- RT @Koh_Biet: Regarding the latest FA explosion: Don't be concerned losing 6 days of uploads. Be concerned the source code got out.
That's… 01:00:50, 2016-05-18
- Head still pounding. Taken paracetamol. Occasional odd sound outside like someone using a chisel. 01:57:26, 2016-05-18
- What is the evolutionary benefit or purpose of having periods? Why can’t women just get pregnant without… https://t.co/eFTDudwLgs 12:56:56, 2016-05-18
- @thetomska Okay, but that trailer was LIGHTYEARS better than the first one. in reply to thetomska 14:47:53, 2016-05-18
- Was very hesitant to look at it, but the second new Ghostbusters trailer looks SO much better than the first one. 14:48:42, 2016-05-18
- Checked the centre of balance for the rotocaster outer frame. Looks like I'll have to use some counterweights. https://t.co/ctixOS3vFC 14:50:39, 2016-05-18
- The frame is going to be a couple of cm wider on one side due to the pulleys. Had hoped the motor would counterbalance that. 14:51:56, 2016-05-18
- But to balance without the frame at all, the motor is already going to need positioning right at the limit of the frame. 14:52:41, 2016-05-18
- @Poodle_Tastic Ants? in reply to Poodle_Tastic 14:56:46, 2016-05-18
- @artsyhonker @OneOffDave Not specifically, but a nut is a nut if you know the size. Would need measuring. in reply to artsyhonker 16:59:37, 2016-05-18
- @artsyhonker @OneOffDave Thread diameter & thread pitch should be all you need. in reply to artsyhonker 17:01:54, 2016-05-18
- RT @nytimes: The soon to be president of the Philippines has promised to kill 100,000 criminals in his first six months in office https://t… 17:03:12, 2016-05-18
- @OneOffDave @artsyhonker Almost every M8 bolt I've found in the wild is 1.25 pitch. If you don't have a thread gauge compare to an M8. in reply to OneOffDave 17:40:38, 2016-05-18
- @OneOffDave @artsyhonker Ebay has tonnes of them. in reply to OneOffDave 17:53:47, 2016-05-18
- Another 20Gb of duplicate files removed.. 18:39:52, 2016-05-18
- RT @RikerGoogling: is lwaxana troi the starfleet computer voice 18:42:10, 2016-05-18
- Can't do anything with them tonight so will leave them in the heated cabinet to demold tomorrow. Look good tho. https://t.co/FC4QvqqvQ4 21:34:10, 2016-05-18
- Cabinet is to ensure full cure. Workshop was about 5c under recommended temperature for the silicone. 21:35:02, 2016-05-18
- Clearing all my old program folders. Why did I have software for transcribing bore-hole data? 22:48:46, 2016-05-18
- Another 30Gb of old files cleared out.. 23:16:27, 2016-05-18
- RT @vonslatt: Oh. Shit. https://t.co/7gxj1D9A5g 23:37:57, 2016-05-18
- My VR headset arrived at the depot half an hour ago! 23:41:30, 2016-05-18
- @gwningen Indeed! Should be fun! in reply to gwningen 23:44:44, 2016-05-18
- @gwningen My GPU is somewhat underspec, but I'm sure I can get something out of it. in reply to gwningen 23:45:57, 2016-05-18
Twitter Updates for 18-05-2016
Twitter Updates for 18-05-2016