Castings in progress

The new work order sheet is helping hugely. I’ve got them listed by resin type, rather than by order. I start at the top, then look at the list to see what moulds are still free that there’s an entry for, then do that.
Makes for some odd bed-fellows, but with the FAR shorter degassing times the bench-top de-gasser’s giving me, it’s easy to manage interleaving the different mixes.

Mondays castings:

Tuesdays castings:

Yes that’s an anvil. I thought it was overkill last time, but since they last couple haven’t bonded to the velcro right without it, it’s in play again.

At this rate, all orders should be complete and shipped at the latest, Monday. Phew.

Please keep an eye on the Twitter feed for up-to-the-minute updates if you’re concerned about your order.

[20/06/2010: Amalgamating old posts from “Dreamwidth Creative Blog” into sci-fi-fox.com to re-purpose DW blog account.]

Up the road from my house, the same place where I got the mechanical bed, is a pile of debris taller than I am. It appeared today while I was in the city. It seems to contain a lot of household items, bits of furniture, appliances and lots of wood and metal.

It’s raining outside. I’ve just taken a leisurely walk in it. It makes everything calm.

The chip and ply in that pile probably won’t make it through the night, and the proper wood will not likely fair well in the high humidity and warm atmosphere. On a colder night it would absorb less.
I already have the OK to take things from the pile, but at gone midnight it’s not the best of times. Still, there should be something worth salvaging tomorrow.

[20/06/2010: Amalgamating old posts from “Dreamwidth Creative Blog” into sci-fi-fox.com to re-purpose DW blog account.]

UKFur Lanyards back in stock!

UKFur lanyards have arrived! Just in time for tomorrows meet.

Awesome. <3

Will be flogging them off for £3.50 each. It’s a bit of a price hike from what they used to be, but these ones have a safety release and I suspect they’ll be a long-tail item (an initial surge followed by a long period of occasional sales), and I need to cover my investment in them ASAP.

Considering generic lanyards cost £3-4 in shops, I’d say it’s still a bargain. And people have been craving them since I first bought the store!

Crossposted to Dreamwidth from my business site. Please leave comments on the original if possible.
http://www.starborneworks.com/?p=227

[20/06/2010: Amalgamating old posts from “Dreamwidth Creative Blog” into sci-fi-fox.com to re-purpose DW blog account.]

Back to casting

So back to casting again, now the mini degasser’s working (and working well at that!).

Success in casting the hemispheres in water-clear styrene!
Last night I carefully trimmed the silicone moulds back to make the walls very thin, so they were drawn in with the surface tension as the styrene shrinks. This meant no streaks anymore, and there doesn’t seem to be any noticeable distortion of the shape.

The biggest problem us then actually getting the styrene out of the tin, especially in small amounts. It’s provided in a paint-tin, so unless you’re using the whole lot in one, you need a way to extract small amounts, and a plastic mixing cup is too big to fit in. So today I quickly brazed together mini ladle out of the stainless lid from a cocktail shaker and a long bolt with a couple of nuts for grip.
I’m keeping it in a glass jar, since I only have one sort of styrene to use, and apparently it’s not hygroscopic like the PU resins are. So this’ll keep it from needing repeated cleaning.

Colour mixing
Tonight I finally got a really rich chocolate colour for the only remaining casting order from before Confuzzled. “What would a melted KitKat look like?” was a good visual guide.

10pts Green, 4pts Red, 1pt Black

The resin claws and footpads are setting overnight. As tomorrow is MCM Expo and I don’t know what time I’ll get home, casting will probably resume on sunday.

T-shirts
I’ve been making enquiries into new variations on the standard UKFur design shirts. I’ll be getting a few “4XL” in in the unisex. Technically they’re still 3XL, but of a shirt type where it corresponds to a 54/56″ chest rather than a 50/52″.

Also been gaining interest in getting some shirts in fitted ladies sizes. Currently looking at getting some in standard black.. but also pink. And other colours too, of course!

http://www.promotional-store.com/%28ec5bicj0gpbrwr45b3qfzt45%29/product.aspx?sqs=5lBamEO6TJFdo0YhKUaoMLQ1W5R4IEWzphCPIqTnTSY%253d

Oddly enough, this one is a heavier weight of cotton than the one I was previously looking at, but much more affordable, and should put the ladies shirts at £12 in whatever colour.

As the next LondonFurs meet is only a week away, I’ll likely make the next order after that (as I may need the extra cash I’ll hopefully earn there, to make this increasingly large order).

[20/06/2010: Amalgamating old posts from “Dreamwidth Creative Blog” into sci-fi-fox.com to re-purpose DW blog account.]

Scavengers amazement

I just want to say, I’m always amazed by the things people throw away these days.
If the adjustable bed I found a few weeks back that’d only had the cable pulled out (contained some ok motors, a lot of angle iron, two 250Watt linear actuators and proof of my disgust of commercial medical equipment design), today I found a 19″ TFT monitor, a proper powered photo-scanner and a PC base unit with a dual-CPU mainboard (admittedly full of twigs, but it’s been dry recently and it was under a tree).

I asked the householder first, and they said the monitor still worked when it went out. After a day of safety drying time and checking inside the housing for debris, I’ll give it a go.

How old will I be when someone just chucks out their old household Replicator or robot servant because they can’t be bothered to feed it into the recycler?

[20/06/2010: Amalgamating old posts from “Dreamwidth Creative Blog” into sci-fi-fox.com to re-purpose DW blog account.]