Old 1.7Ghz machine is out of storage. Running diagnostics to see if I can isolate where the hardware problem is (I suspect the 80Gb boot disk), before installing Win2000 and a capture card on it. And nothing else.
Will also put the old 5.25″ floppy drive in it and see if any old disks still work.
Yesterdays castings are de-moulded. Unfortunately two sets show small areas of unmixed pigment. Will have to double-stage mix it from here on. Still, getting closer to high-resolution shots of all sets, as well as having display sets.
Called TOMPS, still no word yet. Sounds like the boss is out of the office a lot these past few days. Still, have someone wanting a footpad order, and won’t be able to honour it until I have the shore-80. It’s been a week since I emailed them about this.
Up to 9 Mendel brackets cast. Should have the rest needed in an hour or so. I’ll lock up again for a bit after that, get some artwork done, before casting some more pads in the evening.
Had a reply back from the connector company, wanting to know the pitch of the connector image I sent them. I thought I’d included that in my description. Yep. Ugh..
–
DorkBot London was very entertaining last night. My main point of confusion had always been that I’d never found where they talked online. Simple answer; they don’t. You go along, meet people and then communicate one-to-one. This seems surprisingly traditional for such a techno-arty field.
I suppose things like the 2600 meets are the same though. It just feels a little upside-down to me though, having mostly gone to groups or forums which then sparked real-world meetings.
EDIT: 5.25″ drive seems to be working intermittently. Will have to strip it down and clean it.
[20/06/2010: Amalgamating old posts from “Dreamwidth Creative Blog” into sci-fi-fox.com to re-purpose DW blog account.]